Hardware to your Interiors

Hardware 

This would have the key components such as Telescopic Channel, O/ Half hinges, Tandem box, Baskets, Handles, Lift etc. 

For a Wardrobe - There are not too many hardware components used. 

If it is normal swill - then 0 hinges are used or 3 inch hinge is used, for a sliding wardrobe it would have the Sliding system and in this there are various types based on the weight, length, height and mechanism. 

Few of the best brands for this are Hettich, Hafele, Ebco, CNR there are many other Chinese companies also. 

For a Kitchen - This place has the maximum used of hardware components and hence makes the cost to go up based on the product used.

Basic are – Thali plate, Cutlery - which comes in size of 15, 17, 19 inch wide and are normally made of 5mm SS material. There are many brands in this - but most used ones are of Hettich, Sterling, in n out etc. Normal cost for this set of three is from 5500 to 11000/-

Tandem Box - This is now mostly used in all kitchens, due to the sliding effect and the rich feel it gives and the cost which has now become more or less the cost of the baskets. 

                                              

In Tandem box also there are different types based on weight, material, sliding system and a normal tandem box now starts from 3400/- onward. 

Then there are corner units, bottle pull over, overhead lifts etc.

  

In Hinges there are normal hinges and soft closure hinges, the soft closure hinges have a small pump which makes the door to slide softly. Same way for a telescopic channel there are T - Runners which have a spring and makes the drawer to slide softly.